801.263.3763
  • Low maintenance – You only need about 90 minutes a year to clean an entire EnergyLogic waste oil heating system.
  • The industry’s best warranty – EnergyLogic gives you two years on parts* and ten years on the combustion chamber.
  • Human support – EnergyLogic offers both field support from its authorized factory trained service network, and phone support from a dedicated tech services team.
Heater Manual
Boiler Manual
75H Manual

Heater Packages

 

75H

BTU Input
75,000 BTU per hour/
21.98 kW per hour

Fuel Flow Rate
.54 gallons/hour
2.0 liters/hour

Heat Rise Over Input Air
100-120 F
55.6-66.7 C

Air Flow
500 cfm
14.2cu. m/min

Warm Air Outlet Dimensions
10″W x 12.5″H
25.4cm W x 31.75cm H

Exhaust Flue Diameter
6″
15cm

Furnace Dimensions
75″H x 21″W x 26″ L
190.5cm H x 53.3cm W x 66cm L

Shipping Weight
210 lbs
95.3 kg

Regulation and Certification
EPA-approve
UL-listed system – U.S. and Canada

Warranty
10 years on heat exchanger: five years full, five years prorated
Two years on parts*

*One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.

140H

BTU Input

140,000 BTU per hour/
41.6 kW per hour

Fuel Flow Rate
1.0 gallons/hour
3.78 liters/hour

Heat Rise Over Input Air
100-120 F
37.8-48.9 C

Air Flow
1000 cfm/
28 cu. m/min

Warm Air Outlet Dimensions, can be ducted from both sides
15″W x 15″H
38cm W X 38cm H

Exhaust Flue Diameter
6 or 8″ diameter available/
15cm or 20cm

Furnace Dimensions
18″H x 18″W x 92″L
46cm H x 46cm W x 234cm L

Shipping Weight
344 lbs; 354 lbs with top suction kit
156 kg; 160 kg with top suction kit

Approved Fuels
Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel

Electrical Req.
115 VAC 60Hz, 25 amps dedicated circuit

Regulation and Certification
EPA-approve
UL-listed system – U.S. and Canada

Warranty
10 years on heat exchanger: five years full, five years prorated
Two years on parts*
*One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.

200H

BTU Input
200,000 BTU per hour/
58.3 kW per hour

Fuel Flow Rate
1.4 gallons/hour
5.3 liters/hour

Heat Rise Over Input Air
100-120 F
37.8-48.9 C

Air Flow
1500 cfm/
42 cu. m/min

Warm Air Outlet Dimensions, can be ducted from both sides
15″W x 15″H
38cm W X 38cm H

Exhaust Flue Diameter
6 or 8″ diameter available/
15cm or 20cm

Furnace Dimensions
18″H x 18″W x 103″L
46cm H x 46cm W x 262cm L

Shipping Weight
366 lbs; 376 lbs with top suction kit
166 kg; 171 kg with top suction kit

Approved Fuels
Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel

Electrical Req.
115 VAC 60Hz, 25 amps dedicated curcuit

Regulation and Certification
EPA-approve
UL-listed system – U.S. and Canada

Warranty
10 years on heat exchanger: five years full, five years prorated
Two years on parts*

*One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.

 

350H

BTU Input
350,000 BTU per hour/
102 kW per hour

Fuel Flow Rate
2.5 gallons/hour
9.4 liters/hour

Heat Rise Over Input Air
100-120 F
37.8-48.9 C

Air Flow
2600 cfm/
74 cu. m/min

Warm Air Outlet Dimensions, can be ducted from both sides
15″W x 15″H
38cm W X 38cm H

Exhaust Flue Diameter
8″ diameter/20cm

Furnace Dimensions
22″H x 22″W x 117″L
56cm H x 56cm W x 297cm L

Shipping Weight
415 lbs
188 kg

Approved Fuels
Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel

Electrical Req.
115 VAC 60Hz, 25 amps dedicated curcuit

Regulation and Certification
EPA-approve
UL-listed system – U.S. and Canada

Warranty
10 years on heat exchanger: five years full, five years prorated
Two years on parts*

*One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.

 

TO FIND AN ENERGYLOGIC DEALER IN YOUR AREA CALL 800.311.8828

Contact us for special Utah discounts.

75H

  • BTU Input
  • 75,000 BTU per hour/
  • 21.98 kW per hour
  • Fuel Flow Rate
  • .54 gallons/hour
  • 2.0 liters/hour
  • Heat Rise Over Input Air
  • 100-120 F
  • 55.6-66.7 C
  • Air Flow
  • 500 cfm
  • 14.2cu. m/min
  • Warm Air Outlet Dimensions
  • 10″W x 12.5″H
  • 25.4cm W x 31.75cm H
  • Exhaust Flue Diameter
  • 6″
  • 15cm
  • Furnace Dimensions
  • 75″H x 21″W x 26″ L
  • 190.5cm H x 53.3cm W x 66cm L
  • Shipping Weight
  • 210 lbs
  • 95.3 kg
  • Regulation and Certification
  • EPA-approve
  • UL-listed system – U.S. and Canada
  • Warranty
  • 10 years on heat exchanger: five years full, five years prorated
  • Two years on parts*
  • *One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.
Full Spec Sheet

140H

  • BTU Input
  • 140,000 BTU per hour/
  • 41.6 kW per hour
  • Fuel Flow Rate
  • 1.0 gallons/hour
  • 3.78 liters/hour
  • Heat Rise Over Input Air
  • 100-120 F
  • 37.8-48.9 C
  • Air Flow
  • 1000 cfm/
  • 28 cu. m/min
  • Warm Air Outlet Dimensions, can be ducted from both sides
  • 15″W x 15″H
  • 38cm W X 38cm H
  • Exhaust Flue Diameter
  • 6 or 8″ diameter available/
  • 15cm or 20cm
  • Furnace Dimensions
  • 18″H x 18″W x 92″L
  • 46cm H x 46cm W x 234cm L
  • Shipping Weight
  • 344 lbs; 354 lbs with top suction kit
  • 156 kg; 160 kg with top suction kit
  • Approved Fuels
  • Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel
  • Electrical Req.
  • 115 VAC 60Hz, 25 amps dedicated circuit
  • Regulation and Certification
  • EPA-approve
  • UL-listed system – U.S. and Canada
  • Warranty
  • 10 years on heat exchanger: five years full, five years prorated
  • Two years on parts*
  • *One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.
  •  
Full Spec Sheet

200H

  • BTU Input
  • 200,000 BTU per hour/
  • 58.3 kW per hour
  • Fuel Flow Rate
  • 1.4 gallons/hour
  • 5.3 liters/hour
  • Heat Rise Over Input Air
  • 100-120 F
  • 37.8-48.9 C
  • Air Flow
  • 1500 cfm/
  • 42 cu. m/min
  • Warm Air Outlet Dimensions, can be ducted from both sides
  • 15″W x 15″H
  • 38cm W X 38cm H
  • Exhaust Flue Diameter
  • 6 or 8″ diameter available/
  • 15cm or 20cm
  • Furnace Dimensions
  • 18″H x 18″W x 103″L
  • 46cm H x 46cm W x 262cm L
  • Shipping Weight
  • 366 lbs; 376 lbs with top suction kit
  • 166 kg; 171 kg with top suction kit
  • Approved Fuels
  • Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel
  • Electrical Req.
  • 115 VAC 60Hz, 25 amps dedicated curcuit
  • Regulation and Certification
  • EPA-approve
  • UL-listed system – U.S. and Canada
  • Warranty
  • 10 years on heat exchanger: five years full, five years prorated
  • Two years on parts*
  • *One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.
  •  
Full Spec Sheet

350H

  • BTU Input
  • 350,000 BTU per hour/
  • 102 kW per hour
  • Fuel Flow Rate
  • 2.5 gallons/hour
  • 9.4 liters/hour
  • Heat Rise Over Input Air
  • 100-120 F
  • 37.8-48.9 C
  • Air Flow
  • 2600 cfm/
  • 74 cu. m/min
  • Warm Air Outlet Dimensions, can be ducted from both sides
  • 15″W x 15″H
  • 38cm W X 38cm H
  • Exhaust Flue Diameter
  • 8″ diameter/20cm
  • Furnace Dimensions
  • 22″H x 22″W x 117″L
  • 56cm H x 56cm W x 297cm L
  • Shipping Weight
  • 415 lbs
  • 188 kg
  • Approved Fuels
  • Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel
  • Electrical Req.
  • 115 VAC 60Hz, 25 amps dedicated curcuit
  • Regulation and Certification
  • EPA-approve
  • UL-listed system – U.S. and Canada
  • Warranty
  • 10 years on heat exchanger: five years full, five years prorated
  • Two years on parts*
  • *One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.
  •  
Full Spec Sheet

CE-440

  • BTU Input
  • 350,000 BTU per hour/
  • 102 kW per hour
  • Fuel Flow Rate
  • 2.5 gallons/hour
  • 9.4 liters/hour
  • Heat Rise Over Input Air
  • 100-120 F
  • 37.8-48.9 C
  • Air Flow
  • 2600 cfm/
  • 74 cu. m/min
  • Warm Air Outlet Dimensions, can be ducted from both sides
  • 15″W x 15″H
  • 38cm W X 38cm H
  • Exhaust Flue Diameter
  • 8″ diameter/20cm
  • Furnace Dimensions
  • 22″H x 22″W x 117″L
  • 56cm H x 56cm W x 297cm L
  • Shipping Weight
  • 415 lbs
  • 188 kg
  • Approved Fuels
  • Used crankcase oils, ATF, No. 2 fuel oil, up to 90 weight gear oil and diesel fuel
  • Electrical Req.
  • 115 VAC 60Hz, 25 amps dedicated curcuit
  • Regulation and Certification
  • EPA-approve
  • UL-listed system – U.S. and Canada
  • Warranty
  • 10 years on heat exchanger: five years full, five years prorated
  • Two years on parts*
  • *One year warranty standard. Second year warranty requires product registration. Other terms and conditions apply.
  •  
Full Spec Sheet

On Sale Now

Check out these end of year sales and free shipping!

Request a Free Quote